Contact Us+8613924641951

Search
UV Laser Marking Machine For Glass

UV Laser Marking Machine For Glass

Description

The ultraviolet laser marking machine adopts superior performance imported ultraviolet laser generator, since the ultra-small focusing spot of 355nm ultraviolet light and Processing heat affected zone is negligible. Ultraviolet Laser Marking is suitable for processing those materials that have a big reaction to thermal radiation. Ultraviolet Laser Marking Machine is mainly used to mark, engrave and cut for special materials and meet the requirement of marking ultra-fine. It is widely applied in ultra-fine laser process of the high-end market.

Share:

1. General Description of Ultraviolet Laser Marking Machine System:

The ultraviolet laser marking machine adopts superior performance imported ultraviolet laser generator, since the ultra-small focusing spot of 355nm ultraviolet light and Processing heat affected zone is negligible. Ultraviolet Laser Marking is suitable for processing those materials that have a big reaction to thermal radiation. Ultraviolet Laser Marking Machine is mainly used to mark, engrave and cut for special materials and meet the requirement of marking ultra-fine. It is widely applied in ultra-fine laser process of the high-end market.

5W UV laser,2.jpg 

 

2. Features of RL-UV series Ultraviolet Laser Marking Machine:

Maintenance Free
Fiber laser is virtually Maintenance Free compared to other conventional laser, as it doesn’t have mirror to be aligned and almost no optical components, which could have been damaged.

Heat Dissipation
The total power generation and build in fiber laser occurs along a long length of fiber. Thus heat is dispersed over a large surface area unlike DPSSL where heat is normally localized, leading to failure.

Beam Quality
The out put beam quality is exceptionally good with diffraction of m2 < 1.5 to 2.0 depending on the power requirement. This leads to better performance and Improves power to work ratio.

Beam Delivery
The biggest benefit of fiber laser is that the Gain Medium is fiber & delivery is also through the fiber. This leads to less chances of failure at coupling point between gain medium and delivery when extended to the workplace.

Efficiency
The efficiency of fiber laser is up to 20%.

 

3. Technical Parameters

Model

RL-UV5

Laser Power

5W (optional)

Wavelength

355nm

Marking Area

100*100mm (optional)

Repeat Frequency

20-200KHz

Min. Line Width

0.01mm

Marking Speed

≦7000mm/s

Cooling Mode

Water cooled

Voltage

AC 220V/50-60Hz

Grosss Power

1200W

Environment Requirements

Temperature 15-30℃/Humidity 20-80%

Production Origin

Made in China

 

4. UV Laser Marking Machine Applicable Industries

  1. Plastic parts such as air binding

  2. Gold plating, silver and other surface marking

  3. Daily necessities (beverage packaging, food packaging)

  4. Marking of cables and cables

  5. Various pipe surface marks

  6. Flexible materials and carbon fiber cutting (the material thickness is only 200um)


5. Marking Samples

uv sample,2.png 


6. Certification

certificate laser 7.JPG 

 

7. FAQ

Q1: What’s the package?

A: We have 3 layers package. For the outside, we adopt wood craft case. In the middle, the machine is covered by foam, to protect the machine from shaking. For the inside layer, the machine is covered by thickening plastic bag for waterproof.

Q2: Will the package damaged during transportation?

A: Our package is considerate all the damage factors and make it to be safe, and our shipping agent have full experienced in safe transportation. We have exported to 180 countries worldwide. So please don’t worry, you will receive the parcel in good condition.

Q3: How to install and run the machine?

A: Our technician have installed the machine before shipping. For some small parts installation, we will send detail training video, user’s manual along with the machine. 95% customers can learn by themselves.