Description
This model adopts high-precision linear motor workbench, high precision, fast speed; optional high-precision CCD automatic positioning, automatic calibration.
1.Product Introduction
This model adopts high-precision linear motor workbench, high precision, fast speed; optional high-precision CCD automatic positioning, automatic calibration. The whole process controlled by automatic computer software, the software interface real-time feedback, timely understanding of the processing status, non-contact processing program, no mechanical stress and deformation, simple operation, high cutting precision.
2.Product Parameter (Specification)
Product Name | 1200w Precision Laser Cutting Machine |
Working Area | 3000mm*1500mm |
Laser Power | 2000w |
Laser Wave Length | 1060nm |
Maximum Idle Running Speed | 130m/Min |
Control System | Cypcut |
Working Voltage | 380v/50hz |
3.Product Feature and Application
1. Widely used in glasses, electronics, appliances and other precision machinery,hardware, microelectronics industry.
2. 600° heat treatment and 24 hours with the furnace cooling, 8 meters gantry milling finishing, precision welding protection of carbon dioxide, to ensure the normal use for 20 years without deformation.
3. Rail installation with precision collimator test, the accuracy is less than 0.01mm.
4. Taiwan grinding screw drive.
5. High precision, speed, cutting surface smooth.
6. Configure Yaskawa servo system inertia in driving high accuracy.
7. Fully enclosed protective Cover.
4.Samples
5.Our Service
1. Free Samples cutting, we can accept free samples making, your side need to pay the freight.
2. Free technical training, 24-hour-service online is available to give you advice and reply.
3. Flexible form of payment, L/C, T/T.
4. 24 hours professional after sale service support.
6.FAQ
1.What is fiber laser?
A fiber laser is a special type of solid state laser. Generally, fiber lasers are optically pumped. This is done by coupling the radiation of diode lasers or other fiber lasers into the cladding or the core itself in a direction parallel to the fiber core.
In many cases, double clad fibers are used in order to achieve higher output power.
2.What’s the different from fiber laser, YAG laser and CO2 laser working on metal material?
| Fiber Laser | YAG Laser | CO2 Laser |
Beam Quality | Best | Good | Poor |
Speed | Fast | Slow | Slow |
Electrical Efficiency | High | Common | Low |
Reliability | Best | Good | Poor |
Maintenance | Free | Complex | Difficult |
Remote Processing | Free | Complex | Difficult |
Initial Investment | High | Common | Low |