Contact Us+8613924641951

Search

How to Improve The Marking Speed of Fiber Laser Marking Machine

Sep 28, 2020

The purpose of fiber laser marking machine is to bring higher production efficiency to enterprises and create higher value, so how to improve the marking speed of fiber laser marking machine?


1. Internal factors

Internal factors are mainly laser frequency, laser power, laser spot mode and beam divergence angle. Mainly pay attention to the influence of internal factors when selecting models, and you should follow the advice of laser engineers to purchase. External influencing factors need to be paid attention to when processing by customers, mainly including marking density, marking area, marking depth and laser spot size.


2. Marking density

In the case of the same format, the same spot, and the same depth, the higher the marking density, the slower the corresponding marking speed, because the density directly increases the marking area.

CO2打标555 (1)  

3. Marking range

Because the deflection area of the large-format marking galvanometer is enlarged, the marking speed of large-format is slower than that of small-format.


4. Marking depth

According to demand, if the depth of marking needs to be deepened, the parameters of the fiber laser marking machine need to be adjusted, and the power, current and other factors of the fiber laser marking machine need to be increased, which will affect the marking speed.


5. Laser spot size

The smaller the spot, the smaller the marking area. Therefore, the larger the spot, the faster the marking speed.


Previous: No Information

Next: How to Disassemble and Install the Galvanometer